Solid fuel from physic nut waste
Physic nut seed contains the oil nearby of 25-35% of the total unit weight. This form of waste has a crude oil content of 75-65%. Waste can be processed into solid fuel through a process of densification. The process of carbonization or non-carbonization can also be applied to heighten the capability of these solid fuels.
Related expectation of Jatropha Curcas as power Plant (3).
In the carbonization process, waste is inserted into the reactor in order to remove moisture, vaporing matter and tar. After this process, they are sent to the densification process. This process forms the material into briquettes using a press machine.
Recommend expectation of Jatropha Curcas as power Plant (3).
There are two types of press motor used, is hydraulic and screw machine. Densification stock is densified material called briquettes. This fuel can be used as solid fuel. Briquettes can be admittedly burned into the furnace or approved stove. In industrial production, briquettes used to burn water in the boiler. Steam generated, is sent to a steam turbine. This steam spins the generator wheel to yield electricity.
Gas fuel from physic nut waste
The gas fuels can be produced through an anaerobic digestion process. This process is a chemical process involving microorganisms without the proximity of oxygen in a digester. This process produces the methane, carbon dioxide, hydrogen, nitrogen, hydrogen sulfide and a small estimate of gas. Methane is the largest mixture compared with other gas products. This process can be classified into two types: dry and wet anaerobic digestion. The Differences in the middle of these anaerobic processes are the ratio of biomass and water used in the digester.
0 comments:
Post a Comment